Parts for CO2 lasers

High quality lenses GaAs for CO₂ laser machine. It is not suitable for laser machines where the RED POINTER travels through mirrors onto the material. 3 month warranty

High quality lenses ZnSe for CO₂ laser machine. 3 month warranty

To help lift material for better cutting. The use of spacers is especially recommended when cutting plexiglass. DESCRIPTION BELOW

The CW-3000 industrial thermolysis water cooler has a compact design, with energy saving, high cost efficiency, good protection and an alarm system. The water temperature of the cw-3000 refrigerator equalizes the water temperature with the surroundings.

CO2 laser tube 60w widely used to kinds of Mini Laser Engraver, Desktop Laser Cutter Engraver, Laser Stamp Engraving Machine etc. The main advantage of glass co2 laser tube 60w is high beam quality and perfect spot mode, steady, long lifetime etc. The warranty on the laser tube is 3 months. NOTICE: As the glass tube is fragile and there is a possibility of damage during transport, only personal collection or safe delivery is possible.

The DY-10 power supply is suitable for laser tubes from 60W to 90W.

High quality metal mirrors for CO₂ laser machines.
The price is valid for 1 piece.

Rotation for CO2 laser machines, 3-pin connector (stepper motor), 4-pin connector (stepper motor). Rotation is a rotating attachment for a laser machine used to engrave round materials such as jars, bottles, etc. Rotation also allows you to engrave on conical objects. It is very easy to use as you just place the jar or bottle on rotation.

A special comb for cutting plexiglass that does not reflect rays.
Outer dimension: 1200 × 600 mm
Note: The honeycomb may deviate +/- 3 mm.

Honeycomb - work table lining made of galvanized steel and aluminum frame, high 22mm
External dimension: 650 x 450 mm
Note: The honeycomb may deviate +/- 5 mm.

Honeycomb - work table lining made of galvanized steel and aluminum frame, high 22mm
External dimension: 650 x 500 mm
Note: The honeycomb may deviate +/- 5 mm.

Honeycomb - work table lining made of galvanized steel and aluminum frame, high 22mm
External dimension: 760 x 500 mm
Note: The honeycomb may deviate +/- 5 mm.

Honeycomb - work table lining made of galvanized steel and aluminum frame, high 22mm
External dimension: 950 x 650 mm
Note: The honeycomb may deviate +/- 5 mm.

S&A Industrial laser chiller are popular because of their two ways of controlling the temperature as constant temperature and intelligent way of controlling it. In intelligent mode, the water temperature only adjusts to the ambient temperature. With this key solution, customers no longer have to worry about adapting their water temperature to seasonal changes.

The manufacturer of RECI tubes has adopted a new production technique and formula for blowing CO2 gas to ensure high quality and stability of glass laser tubes. The long life of the laser tube is made possible by the catalyst coating on the inside of the glass tube, which helps to better cut thicker materials. We have laser tube power from 90w to 130w. NOTICE: As the glass tube is fragile and there is a possibility of damage during transport, only personal collection is possible. At the express request of the buyer, the tube can also be sent. In this case, we are not responsible for any damage.

The DY-20 power supply is suitable for laser tubes from 130W to 180W.

The manufacturer of RECI tubes has adopted a new production technique and formula for blowing CO2 gas to ensure high quality and stability of glass laser tubes. The long life of the laser tube is made possible by the catalyst coating on the inside of the glass tube, which helps to better cut thicker materials. We have laser tube power from 90w to 130w. NOTICE: As the glass tube is fragile and there is a possibility of damage during transport, only personal collection is possible. At the express request of the buyer, the tube can also be sent. In this case, we are not responsible for any damage.

Napajalnik HY T100 je primeren za laserske cevi moči od 80W do 120W.

The manufacturer of RECI tubes has adopted a new production technique and formula for blowing CO2 gas to ensure high quality and stability of glass laser tubes. The long life of the laser tube is made possible by the catalyst coating on the inside of the glass tube, which helps to better cut thicker materials. We have laser tube power from 90w to 130w. NOTICE: As the glass tube is fragile and there is a possibility of damage during transport, only personal collection is possible. At the express request of the buyer, the tube can also be sent. In this case, we are not responsible for any damage.

The HY T80 power supply is suitable for laser tubes from 60W to 90W.